The CETATEST 725 is a full automatically working leak tester for the detection of untight parts within the cycle time of the production process. The leak tester uses a gauge pressure sensor and has a large measurement range.
The integrated 7-inch touch-screen with an intuitive operable graphical user interface makes it possible to display a wide range of information (e.g. measurement curves, histograms). Operation is possible both via the touch-screen and via a dual-jog dial. Separate start / stop buttons ensure operating safety even in harsh industrial environments. Prepared for Industry 4.0 requirements. Measuring range up to 10,000 Pa
The memory stores more than 1 million measurement results and 256 test programs.
| Specification | Details |
|---|---|
| Sensor Type | Gauge pressure sensor |
| Pressure Ranges | -1 bar, 200 mbar, 1 bar, 6 bar, 10 bar Negative and positive gauge pressure ranges can be combined (e.g., -1 bar / +1 bar, -1 bar / +6 bar) Other pressure ranges available on request |
| Measurement Range | Max. ±10,000 Pa, depending on the pressure range (resolution: 1 Pa) Other ranges available on request |
| Result Units | Pa, hPa, PSI, Pa/s, hPa/s, PSI/s, mbar·l/s, ml/min, ml/h, l/min, l/h, mmHg, mmWs, Torr |
| Pressure Regulator | Electronic |
| Test Mode | Pressure decay test |
| Optional Test Modes | Sealed component, dynamic pressure, pressure steps |
| Interfaces | – I/O interface for start/stop/reset, program selection, device status, system errors, test results (pass/fail) – RS-232, USB (host), Ethernet – Optional interfaces for additional functions like parameterization, measurement results, real-time details (e.g., measurement curve), failure messages – Optional interfaces: Profibus DP, Profinet, EtherCAT, or USB (Slave) – CETATEST 725 is fully interface compatible with CETATEST 715 and designed for Industry 4.0 requirements |
| Dimensions (W×H×D) | 367 mm × 183 mm (4U) × 435 mm |
| Typical Applications | Testing of sanitary armatures, plastic weldings, ball valves |
